Vanity units are a great addition to your bathroom or downstairs toilet, if you want something a little different to hide away pipework whilst maintaining practical storage then this is the answer for you.
Our cabinets have been produced using the same traditional methods for over thirty years, the same care and attention to detail goes into any piece of our furniture from kitchens, to vanity units.
The Elham is a single basin unit but there is a double on the way! If you opt for the undercounter sink then the top drawer will be false while the bottom to remain fully functional. If you opt for the countertop sink then all three drawers become functional.
The drawers, will run on soft close runners ensuring a smooth closing. The drawers themselves are manufactured from solid maple and maple faced mdf for the base, all internal surfaces are finished with two coats of lacquer ensuring you can keep them clean and protected. All drawers are handmade using traditional methods with dovetailed joints front and back.
The traditionally made cabinet is handmade using oak faced mdf for solid construction, housing joints are used to remove movement of timber. This method of construction ensure years of use.
Dimensions of of unit to fit a counter top basin are:
450mm, without counter top
475mm, with counter top
463mm, with feet
750mm, without counter top
770mm, with Quartz or Carrara Marble
770mm, with 75mm full stave Oak top
Dimensions of of unit to fit an under mount basin:
550mm, without counter top
575mm, with counter top
563mm, with feet
850mm, without counter top
870mm, with Quartz or Carrara Marble
870mm, with 75mm full stave Oak top
Counter Top Basins:
- A round basin is included as standard when this option is selected
- For units 1400mm or narrower, the basin measurements are as follows:
Diameter: c358mm, Height c155mm
- For units 1500mm or wider, the basin measurements are as follows:
Diameter: c400mm, Height: c155mm
Under Mount Basins:
- An oval under mount basin is included as standard when this option is selected
- The basin measurements are as follows for units 1400mm in width or wider:
Width: c500mm, Depth: c420mm Height: c120mm
- And for our 1200mm and 1300mm units the basin size would be as follows:
Width: c390mm, Depth: c260mm Height: c120mm
If you select the 'No Basin' option, your unit will be built and supplied to fit a counter top basin with a 80mm central hole cut out in the counter top (if one has been selected) for the waste connections.
Please click here for further information on basins.